2015/07/22
Manifatturati minn wajer ta 'kwalità għolja, kull partiċella huwa maqtugħ għal tul kważi daqs il dijametru tiegħu. Jekk ikun meħtieġ, il-partiċelli huma kkundizzjonati (mqarrba) sabiex jitneħħew l-kantunieri li jaqtgħu prodotti matul il-proċess tat-tqattigħ. proċeduri stretti Kontroll tal-Kwalità huma meħtieġa li jkunu kapaċi jimmanifattura maqtugħa laqgħa sparatura wajer ispeċifikazzjonijiet kollha tal-industrija komuni kif ukoll ħafna ispeċifikazzjonijiet tal-klijent individwali.
Bħala cut-partiċelli huma joborxu effettivi minħabba l-truf li jaqtgħu maħluqa fil-proċess tat-tqattigħ. Madankollu, sparatura kif cut mhix xi sparatura mixtieq peening midja. It-truf li jaqtgħu, li huma potenzjalment ta 'dannu għall-ħajja għeja, għandhom jitneħħew fi proċess li jissejjaħ "kondizzjonament".
Kondizzjonata Cut Wajer (CCW) tir hija normalment fabbrikata f'żewġ gradi ta 'kondizzjonament - Normali Kondizzjonament li tissodisfa r-rekwiżiti forma ta' speċifikazzjoni SAEJ441, u l-Kondizzjonament Speċjali aktar tond li tissodisfa r-rekwiżiti ta 'speċifikazzjonijiet Aerospace bħal AMS 2431.
Normali Kondizzjonament
SAE J441
Speċjali Kondizzjonament
AMS 2431
Depending on application, various hardness ranges are available with cut wire media. Generally, the higher the hardness of the media, the lower the durability. However for shot peening applications, the shot used should be at least as hard as Almen strips or the part being peened, whichever is harder.Common Hardness Ranges in Carbon Steel Cut Wire Shot are: Blasting Applications – HRC 45-50; Shot Peening high strength parts such as carburized gears and springs HRC 55-60; and Shot Peening softer parts – HRC 50-55.
Versatility – One of the most important aspects of cut wire shot is its versatility. Cut Wire Shot can be made from many materials: Stainless Steels (Type 302, Type 304, Type 430 and others), 1070 Carbon steel of various hardness levels, Aluminum, Zinc and Nickel alloys. Size of media is not limited to the standards. Conditioning is offered in Standard degrees: As-cut, Normal and Special. Other degrees of Conditioning are, and can be supplied as well. Hardness ranges other than those discussed above can also be supplied.
Ibgħat messaġġ tiegħek lilna:
Post ħin: Lul-22-2015